Xylem Flojet 02830 Serie Manual De Instalación Y Funcionamiento página 6

to connecting power back to the pump and continuing with instructions.
7. Test the system to ensure no leaks.
*Port clips should be in the locked position (if applicable).
1
2
Rinse
3
4
5
6
7
Sanitize
8
9
10
11
12
Rinse
13
14
Repeat above steps as needed to thoroughly sanitize the Booster System.
WARRANTY
XYLEM LIMITED WARRANTY WARRANTS THIS PRODUCT TO BE FREE OF DEFECTS AND WORKMANSHIP FOR A PERIOD OF 1 YEAR FROM DATE OF MANUFACTURE. THE
WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, GUARANTEES, CONDITIONS OR TERMS OF WHATEVER NATURE RELATING
TO THE GOODS PROVIDED HEREUNDER, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
WHICH ARE HEREBY EXPRESSLY DISCLAIMED AND EXCLUDED. EXCEPT AS OTHERWISE PROVIDED BY LAW, BUYER'S EXCLUSIVE REMEDY AND SELLER'S AGGREGATE LIABILITY
FOR BREACH OF ANY OF THE FOREGOING WARRANTIES ARE LIMITED TO REPAIRING OR REPLACING THE PRODUCT AND SHALL IN ALL CASES BE LIMITED TO THE AMOUNT PAID
BY THE BUYER HEREUNDER. IN NO EVENT IS SELLER LIABLE FOR ANY OTHER FORM OF DAMAGES, WHETHER DIRECT, INDIRECT, LIQUIDATED, INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, EXEMPLARY OR SPECIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFIT, LOSS OF ANTICIPATED SAVINGS OR REVENUE, LOSS OF INCOME, LOSS OF
BUSINESS, LOSS OF PRODUCTION, LOSS OF OPPORTUNITY OR LOSS OF REPUTATION. THIS WARRANTY IS ONLY A REPRESENTATION OF THE COMPLETE LIMITED WARRANTY.
FOR A DETAILED EXPLANATION, PLEASE VISIT US AT www.xylem.com/en-us/support/, CALL OUR OFFICE NUMBER LISTED, OR WRITE A LETTER TO YOUR REGIONAL OFFICE.
RETURN PROCEDURE
Warranty returns are conducted through the place of purchase. Please contact the appropriate entity with a receipt of purchase to verify date.
Fill a clean bucket (5 Gal / 18.9 L size minimum) with 4 gallons (15.1 L) of hot tap water (120°F / 49°C
Max) and use as liquid supply source. Ensure a clean strainer is used to filter any debris/particulates
from entering into the Booster System.
Place another empty 5-gallon bucket under the dispensing valve/tap (You can incorporate a funnel and
tubing to direct the liquid flow from the dispenser to the bucket).
Open the dispensing valve/tap and dispense fluid into the empty bucket until the supply bucket with
hot tap water (120°F / 49°C Max) is empty.
Close the dispensing valve/tap.
Fill a clean bucket (5 Gal / 18.9 L size minimum) with 4 gallons (15.1 L) of hot tap water, adding 2oz of
household bleach; this will be used as the liquid supply source.
Place another empty 5-gallon bucket under the dispensing valve/tap (You can incorporate a funnel and
tubing to direct the liquid flow from the dispenser to the bucket).
Open the dispensing valve/tap and dispense fluid into the empty bucket until the line has been filled
with chemical.
Close the dispensing valve/tap once you see the chemical exiting the dispensing valve/tap.
Keep dispensing valve/tap closed and allow chemical solution to be soaked for 15 minutes.
Open the dispensing valve/tap and dispense remaining chemical cleaning fluid into the bucket until
the supply bucket with the cleaning chemical is empty.
Fill a clean bucket (5 Gal / 18.9 L size minimum) with 4 gallons (15.1 L) of hot tap water (120°F / 49°C
Max) and use as liquid supply source. Ensure a clean strainer is used to filter any debris/particulates
from entering into the Booster System.
Place another empty 5-gallon bucket under the dispensing valve/tap (You can incorporate a funnel and
tubing to direct the liquid flow from the dispenser to the bucket).
Open the dispensing valve/tap and dispense fluid into the empty bucket until the supply bucket with
hot tap water (120°F / 49°C Max) is empty.
Rinse all cleaning equipment and fittings thoroughly prior to reinstallation or storing.
6