Publicidad
Idiomas disponibles
Idiomas disponibles
PEAK-HOLD-MODUS
1. If
xFULLx
is appeared, that means the wrench memory is full and the next value record cannot
be written in. Please refer the section "Peak Hold Mode Recorded Value Review" to clear the
memory records.
2. IF
xEr0x
that means this torque wrench has ever been applied more than 110% of torque of
specification.
3. When 80% of the target torque is reached, the green LED begin to flash and the alarm tone will
beep intermittently.
4. When the target torque is approached, the alarm will change to a steady tone and the green
LED will stop flashing and stay on. The red LED will also illuminate.
Power on
Press button
Current
torque value
80% of
target torque
100% of
target torque
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Setting target torque
Apply torque
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Apply torque
Released
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Record
Flashing
Publicidad
