Publicidad
Idiomas disponibles
Idiomas disponibles
•
Filter time reset
The filter icon will illuminate after
the filter has been operating for
150 days, indicating the need to
replace the filter. After 180 days,
the filter icon will flash to indicate
the user to change the filter. Press
and hold the "RESET FILTER"
button for 3S to execute the
"RESET FILTER" function. The
filter timer will then be reset. en,
the filter timer will be reset.
NOTE
The timing unit of the cumulative working
time of the filter is accumulated once
every 24 hours and stored in EEPROM,
with the power lost memory function.
•
Power-off storage
In the event of a power failure, the
operating mode will be stored and
will be restarted when power is
restored.
•
Fault indication
The display may show one of the
following codes to indicate an
appliance fault. Although the
refrigerator may continue to cool
despite displaying these errors,
the user should call for service to
ensure optimal operation of the
refrigerator.
Fault
Fault description
code
E0
Icemaker fault
Refrigerating chamber
E1
temperature sensor fault
Freezing chamber
E2
temperature sensor fault
Freezing and defrosting
E5
sensor fault
Communication fault of main
E6
board and display board
Ambient temperature
E7
sensor fault
Humidity sensor fault
EH
Icemaker sensor fault
EE
Ice-separating fault of
EP
icemaker
Communication fault
of main board and ice
CA
making board
17
V.1
Publicidad
