Included - Sharp CV-P10PR Manual De Funcionamiento

• Be sure to turn the unit off and disconnect the power plug from the wall socket before
performing any maintenance or cleaning. A fan is rotating inside the unit and you may get
injured.
• Place the unit on a level surface to avoid water spilling out into the room.
• Make sure to connect the air conditioner to power supply of the rated voltage and fre-
quency. Use of a power supply with improper voltage and frequency can result in equip-
ment damage and possible fire.
• Do not use the unit in a place where inflammable gas may leak. It may cause fire.
Use the unit in a place with minimal dust, fumes and moisture in the air.
• Make sure a leak breaker or a circuit breaker is installed, depending on the installation
location, to avoid electrical shock.
• Install an earth leakage breaker to avoid electric shock in case of leak.
Use the current-activated, high-sensitivity, high-speed type breaker with a rated sensitivity
current of below 30 mA and an operating time of below 0.1 second.
LOCATION
• The unit should be placed on a firm foundation to
minimize noise and vibration. For safe and secure
positioning, place the unit on a smooth, level floor
strong enough to support the unit. This will also
help to avoid water spilling out into the room
• The unit has casters to aid placement, but it
should only be rolled on smooth, flat surfaces.
Use caution when rolling on carpet surfaces. Do
not attempt to roll the unit over objects.
• The unit must be placed within reach of a properly
rated grounded socket.
• Never place any obstacles around the air inlet or
outlet of the unit.
• Allow at least 30 cm of space from the wall for ef-
ficient air-conditioning.

INCLUDED

Exhaust hose
Window adapter
Rain guard
Insect guard net
1
Remote control
1
Battery
(R03)
2
GB-3
30 cm
30 cm
Manual
1
1
2
30 cm
1