Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 26 Monday, October 30, 2023 10:14 AM
26 OPERATION
Changing Oven Settings
Clock
The clock must be set to the correct time of day in
order for the automatic oven timing functions to
work properly.
1
Press Clock
2
Press plus (+) or minus (-) to select the
desired time.
3
Press START.
NOTE
• The time of day cannot be changed during a
timed baking or self-clean cycle.
• To check the time of day when the display is
showing other information, press Clock.
• If no other buttons are pressed within 25
seconds of pressing Clock, the display reverts to
the original setting.
• If the display time is blinking, there may have
been a power failure. Reset the time.
• The control is set to use a 12-hour clock. To set
the clock to 24-hour mode, see the "Settings"
section.
Oven Light
The interior oven light automatically turns on
when the door is opened.
• Press Light to manually turn the oven light on.
NOTE
• The oven light cannot be turned on if the Self
Clean function is active.
Timer On/Off
The Timer serves as an extra timer in the kitchen
that beeps when the set time has run out. It does
not start or stop cooking.
The Timer feature can be used during any of the
other oven control functions.
1
Press Timer On/Off once.
0:00 appears and Timer flashes in the display.
NOTE
• Press Timer On/Off twice to set the time in
minutes and seconds.
• Press Timer On/Off once to set the time in
hours and minutes.
2
Press plus (+) or minus (-) to select the
desired time.
3
Press Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
NOTE
• If Timer On/Off is not pressed, the display
returns to the time of day.
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
4
When the set time runs out,
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
Canceling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.
Wi-Fi
The Wi-Fi button is used to connect the appliance
to a home Wi-Fi network.
1
Press and hold Remote Start for 3 seconds.
2
The power on chime sounds, SEt appears in
the display, and the Wi-Fi icon (
3
Connect the appliance to the Wi-Fi network
using the LG ThinQ smartphone app.
4
To disconnect the appliance from the
network, delete it from the connected
appliances in the app.
ENd
shows in the
f
) blinks.
Publicidad
