Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 61 Monday, October 30, 2023 10:14 AM
2
Align the glide on each side of the drawer with
the glide slots on the range.
3
Push the drawer into the range until levers
click (approximately 2 inches).
4
Insert and tighten the screws on the side at
the back of the drawer.
5
Pull the drawer open again to seat the
bearing glides into position.
Removing/Assembling the Vent
Trim
Removing the Vent Trim
1
Using a screwdriver, remove the two screws
holding the vent trim in place.
2
Move the vent trim in the indicated direction
approximately 1/4".
3
Lift the vent trim.
Assembling the Vent Trim
Assemble the vent trim in the reverse sequence of
its removal.
Periodic Maintenance
Changing the Oven Light
The oven light is a standard 40-watt appliance
halogen lamp. It turns on when the oven door is
open. When the oven door is closed, press Light to
turn it on or off.
WARNING
• Make sure that the oven and lamp are cool.
• Disconnect the electrical power to the range at
the main fuse or circuit breaker panel. Failure to
do so can result in severe personal injury, death,
or electrical shock.
1
Unplug the range or disconnect power.
2
Turn the glass lamp cover in the back of the
oven counterclockwise to remove.
3
Remove the halogen lamp from the socket.
4
Insert the new halogen lamp.
5
Insert the glass lamp cover and turn it
clockwise.
MAINTENANCE
61
Publicidad
