cecotec BOLERO FLUX DT 606500 GLASS BLACK A Manual De Instrucciones página 55

Neither the light
bulb nor the motor
works
Grease falls out
of the aluminium
filters
The kitchen hood
vibrates
The kitchen hood
is not sufficiently
extracting
The kitchen hood
is tilted
- If none of these situations match your problem, do not attempt to disassemble, or repair
the appliance by yourself. Repairs carried out by unqualified persons may result in injury
or serious malfunctions. Contact the official Cecotec Technical Support Service. The repair
must be carried out by an authorised technician, and you must use only original spare
parts.
- Unauthorised self-maintenance or maintenance will affect the safe use of the product and
the application of the warranty policy.
In addition to the above, check the following:
The light bulb has blown.
Power cable is loose.
The filters are very dirty.
The fan is damaged, causing
the kitchen hood to vibrate
when extracting air.
The engine is not securely
fastened.
The kitchen hood is not
securely fastened.
The distance between
the kitchen hood and the
cooking surface is too large.
There is too much
ventilation in the room due
to open doors or windows.
Fastening screws are not
tightened properly.
Plastic plugs are not
tightened properly.
BOLERO FLUX DT 606500 GLASS BLACK A / BOLERO FLUX DT 906500 GLASS BLACK A
Please contact the official Cecotec
Technical Support Service to replace
the light bulb.
Please contact the official Cecotec
Technical Support Service to connect
the cables according to the wiring
diagram.
Clean or replace the aluminium filters
immediately.
Please contact the official Cecotec
Technical Support Service to replace
the fan.
Fix the engine correctly.
Fix the kitchen hood correctly.
Readjust the distance.
Relocate and reinstall the kitchen
hood.
Reposition the kitchen hood
horizontally and tighten the screws.
Reposition the kitchen hood
horizontally and tighten the plugs.
ENGLISH
55