Roborock S8 MaxV Ultra Manual Del Usuario página 6

GROUNDED OUTLET
GROUNDING PIN
AA200
Battery and Charging
Keep the charging dock away from heat (such as radiators).
Do not wipe the charging contacts with wet cloth or wet hands.
Before placing the robot into storage, charge it fully, turn it off, and then choose a cool, dry place. Recharge it at least
every three months to avoid battery overdischarge.
Do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F), or there is any liquid
or sticky substance on the floor.
Do not discard waste batteries. Leave them with a professional recycling organization.
To transport the product, make sure it is powered off and shut down, and empty the remaining fluid in the dock. At the
same time, empty and rinse the cleaning solution cartridge, leave it air dry completely and then reinstall it. Original
packaging is advised.
International Symbols Explanation
~ – ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)]
– DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)]
– PROTECTIVE EARTH (Protective Ground) symbol [symbol IEC 60417-5019 (2009-02)]
Grounding methods
GROUNDED OUTLET BOX
(A)
ADAPTER
METAL SCREW
TAB FOR GROUNDING
(B)
SCREW
06
(C)