cecotec ENERGYSILENCE AERO 5200 BLACK PRO Manual De Instrucciones página 45

Fig. 9 key:
1. Fixing screws
Fig. 10 key:
Lamp bracket
1.
Fixing screws
2.
Fig. 11 key:
Light input wire terminal
1.
Installing the lamp
12. Place the lamp on its bracket. Fix it securely by turning it counterclockwise. Fig. 12
Hanging the fan
13. Lift the fan carefully and install the downrod and hanging ball into the mounting bracket
attached to the ceiling. Make sure that the groove in the hanging ball is properly aligned
with the tab on the mounting bracket. Fig. 13
WARNING: the fan must be placed at a minimum distance of 230 cm from the floor.
Connection of the remote-control receiver
14. Insert the receiver into the mounting bracket as shown in Fig. 14.
WARNING: to avoid the risk of electric shock, be sure to disconnect the mains supply from the
switchboard before connecting the cables.
Receiver wiring
15. You must follow the electrical diagram shown in Fig. 15.
Installing the canopy
16. Fit the canopy by tightening the two screws. Fig. 16
4. OPERATION
Fig. 17 key:
Power indicator light
1.
2. Speed setting
Fan OFF button
3.
Blade reversal button
4.
5. Natural Breeze button
Light on/off button
6.
Timer buttons
7.
ENERGYSILENCE AERO 5200 BLACK PRO
ENERGYSILENCE AERO 5200 WHITE PRO
ENGLISH
45