Hkoenig kub14 Manual De Instrucciones página 13

TROUBLESHOOTING
Please note, if a power failure occurs due to disconnection of the power cord,
1.
or the power button has been pushed off during an ice making cycle, small ice
chips may formed and lodge in the automatic shovel causing it to jam. If this
occurs, the ice chips may be removed by disconnecting the power cord and
gently pushing the shovel to the rear of the cabinet and removing the ice chips,
then restarting.
Please check if the water reservoir is flat when the ice shovel can not remove
2.
the ice to ice collecting tray. If not, please push the ice shovel gently by finger,
then press START/PAUSE button to restart.