Descargar Imprimir esta página

Hkoenig kub14 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
1. During transportation, do not tilt the machine more than 45 degrees, do
not reverse the machine. This may damage the compressor and the
sealing system.
2. Remove all packing materials, check the machine carefully and make
sure that the machine, power cord and plug are normal.
3. The machine should be on a level surface. To ensure sufficient
ventilation, the distance of the back of ice maker to the wall should be at
least 150mm, it should be away from the oven, radiator or other heat
source.
4. Before using the machine for the first time, place the machine and leave
the transparent cover open for at least two hours.
5. Make sure that the home voltage is consistent with the voltage indicated
by the machine.
6. When the ambient temperature is lower than 15 degrees, please choose
small ice. When the ambient temperature is higher than 30 degrees, it is
recommended to choose large ice.
7. Do not use chemicals, acidic or alkaline liquids to make ice.
CONTROL PANEL OPERATION

Publicidad

loading