Eaton TRIPP LITE Serie Guia De Inicio Rapido página 2

Installation
Instalación / Installation /
Installation / Installazione
B127E-1A1-HH
Extender Kit
PC WITH PC WITH
USB RS-232
CONTROL CONTROL
4 4 3 3
2 2
MONITOR
LOCAL TRANSMITTER
Notes:
• Test to ensure the entire installation works properly before pulling cables through ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid-wire Cat6 cable. Using
stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in
shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All N202-Series Cat6 cables are made with 24
AWG solid-wire cabling.
• The installation diagram shows a B127E-1A1-HH unit.
• External power is not required for remote receiver units due to Power-over-Cable (PoC) technology
incorporated in the transmitter units.
1. Make sure all equipment in the installation is powered OFF.
2
1
Up to 328 ft. (100 m) Cat6 cable at 4K/60 Hz
2
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
3
RS-232 Male to Male Cable
4
Micro USB Cable
USB
MOUSE
IR SENSOR
IR Control
USB
Pad
KEYBOARD
2 2
1 1
Up to 328 ft. (100 m) at 4K/60 Hz
HDR PLAYER
RS-232 SCANNER/
OPTIONAL
IR SENSOR
IR Control
3 3 Pad
2 2
REMOTE RECEIVER