Publicidad
Idiomas disponibles
Idiomas disponibles
• Avoid accidental starting. ensure the switch is in
the off position before plugging in. Carrying power tool
with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
• Remove any adjusting keys or wrenches
before turning the power tool on. a wrench or
key that is left attached to a rotating part of the tool may
result in personal injury.
• Do not overreach. Maintain proper footing and
balance at all times. loss of balance can cause an injury
in an unexpected situation.
• If devices are provided for connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. use of these devices can reduce dust related
hazards.
• Do not use a ladder or unstable support.
stable footing on a solid surface enables better control
of the tool in unexpected situations.
• Keep tool handles dry, clean and free from
oil and grease. slippery handles cannot safely
control the tool.
TOOL USE AND CARE
• Secure the workpiece. use clamp or other
practical way to hold the workpiece to a stable platform.
holding the workpiece by hand or against your body is
unstable and may lead to loss of control.
• Do not force the power tool. the tool will
perform the job better and safer at the feed rate for
which it is designed. forcing the tool could possibly
damage the tool and may result in personal injury.
• Use the correct power tool for the job. Do
not force the tool or attachment to do a job for which it
is not designed.
• Do not use a tool if the switch does not
turn it on or off. any tool that cannot be controlled
with the switch is dangerous and must be repaired or
replaced by an authorized service center.
• Turn the power tool off, and disconnect
the plug from the power source and/or battery pack
from the power tool before making any adjustments,
changing the accessories, or storing the tools. such
preventive safety measures reduce the risk of an
accidental start up which may cause personal injury.
• Store idle tools out of reach of children and
other inexperienced persons. it is dangerous in
the hand of untrained users.
• Maintain power tools with care. Check
for proper alignment and binding of moving parts,
component breaks, and any other conditions that may
affect the tool's operation. a guard or any other part that
is damaged must be properly repaired or replaced by
an authorized service center to avoid risk of personal
injury.
• Only use recommended accessories. using
accessories and attachments not recommended by
the manufacturer or intended for use on this type tool
may cause damage to the tool or result in personal
GENERAL SAFETY RULES
ENGLISH
injury to the user. Consult the operator's manual for
recommended accessories.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Feed the workpiece in the correct direction
and speed. feed the workpiece into a blade, cutter,
or abrasive surface against the direction of the cutting
tool's direction of rotation only. incorrectly feeding
the workpiece in the same direction may cause the
workpiece to be thrown out at high speed.
• Never leave the tool running unattended,
turn the power off. Do not leave the tool until it
comes to a complete stop.
BATTERY TOOL USE AND CARE
• Ensure the switch trigger is in the off
position before inserting the battery pack.
inserting the battery pack into a power tool that have
the switch on invites accidents.
• Recharge only with the charger specified
by the manufacturer. a charger that is suitable for
one type of battery pack may create a risk of fire when
used with another battery pack.
• Use battery tools only with specified
battery packs. use of any other battery packs may
create a risk of injury and fire.
• Avoid storing the battery pack in a
container with other metal objects such as
nails, coins, clips, keys, screws, or other small metal
objects that can make a connection from one terminal
to another. always protect the battery terminals when
battery pack is not being used. Connecting the battery
terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be
ejected from the battery. avoid contact. if
contact does occur accidently, flush with water. if liquid
contacts eyes, seek immediate medical assistance.
liquid ejected from the battery may cause irritation or
burns.
• Battery tools do not need to be plugged
into an electrical outlet, therefore, they are
always in operation condition. be aware of possible
hazards when not using your battery tool or when
changing accessories. following this rule will reduce
the risk of electric shock, fire or personal injury.
SERVICE
• Have your power tool serviced by a
qualified repair person using only identical
replacement parts. this will ensure that the safety
of the power tool is maintained.
• Service your power tool periodically. when
cleaning a tool, be careful not to disassemble any
portion of the tool since internal wires may be misplaced
or pinched.
SAVE THESE INSTRUCTIONS
3
Publicidad
