LD Systems ANNY 10 Manual De Usuario página 16

BLUETOOTH – VOLUME
10
Level control for adjusting the volume of a Bluetooth accessory device, e.g. smartphone.
Turn counterclockwise: Decrease volume. Turn clockwise: increase volume (pair Bluetooth accessory,
see OPERATION – BLUETOOTH SETTINGS).
INPUT 5
11
Mounting slot with audio input for a receiver module for channel 5. The volume of the channel is controlled
by a volume control in the receiver module.
ANTENNA
12
BNC socket for connecting an antenna for the receiver module of INPUT 5 (a suitable antenna is included
with the receiver module).
INPUT 6
13
Mounting slot with audio input for a receiver module for channel 6. The volume of the channel is controlled
by a volume control in the receiver module.
ANTENNA
14
BNC socket for connecting an antenna for the receiver module of INPUT 6 (a suitable antenna is included
with the receiver module).
VOLUME / PUSH FOR MENU
15
Rotary-push encoder with multiple function.
1. Starting from the main display, the overall volume can be adjusted directly by turning the rotary-push
encoder. Counterclockwise rotation: Decrease volume. Clockwise rotation: Increase volume.
Before playing back audio data or using a microphone, set the overall volume to minimum and then
increase the volume only slowly to avoid damage to the unit or hearing damage due to sudden high
volume levels and feedback.
2. Press the rotary-push encoder to enter the main menu. Navigate in the main menu using the turn-push
encoder, select the desired submenu item by turning the encoder, confirm by pressing the encoder,
adjust system settings and change values in the corresponding menu items (see OPERATION; change
value or status = turn encoder, confirm value or status change = press encoder).
DISPLAY
16
Multifunctional graphic LC display for showing overall volume, speaker and effect preset, Bluetooth and
battery status, and input level for channels 1, 2, 3/4 and 5/6 in the main display. The edit menu shows
the menu items, the submenu items and the corresponding edit options. Brightness, contrast and
switch-off of the display illumination are adjustable.
EFFECT
17
Level control for adjusting the effect volume (effect return). The effect type and the effect sends are
set in the unit menu under EFFECT.
FOOTSWITCH FX ON/OFF
18
6.3 mm jack socket for connecting a footswitch (on/off switch). With an external footswitch with a 6.3 mm
jack plug, you can mute the internal effect module and unmute it again.
16