Descargar Imprimir esta página

LD Systems ANNY 10 Manual De Usuario página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 105
BODYPACK TRANSMITTER
5
4
ON / STANDBY / OFF
1
Switch for switching the pocket transmitter on or off (ON = transmitter switched on, OFF = transmitter
switched off). In the STANDBY position, the transmitter is in operation but the audio signal is muted.
INPUT
2
3-pin mini-XLR jack for connecting a headset or lavalier or instrument microphone and a guitar cable.
MIC / 0dB / -10dB
3
Adjust the input sensitivity. Set the sensitivity so that when a signal is present (speech, vocals, guitar ...)
the AF LED of the receiver lights up green. As soon as the audio signal begins to distort, reduce the
sensitivity by setting the 3-step switch MIC / 0dB / -10dB to the next lower value.
Examples: Headset = MIC, guitar with passive pickup = 0dB, guitar with active pickup = -10dB.
STATUS LED
4
If the charging status of the inserted batteries is sufficient, the LED lights up green when the transmitter
is switched on. If the LED lights up red, the charging status is low. Replace the used batteries immediately.
ANTENNA
5
Antenna of the bodypack transmitter. For optimum reception, do not cover or bend.
24
4
2
3
1
5
6

Publicidad

loading

Este manual también es adecuado para:

Ldanny10