LD Systems ANNY 10 Manual De Usuario página 22

RECEIVER MODULE
6
3
7
2
VOLUME
1
Turn the control clockwise over the detent to switch the receiver on, another clockwise turn raises the
volume, counterclockwise turn lowers it. Turn the control counterclockwise over the detent to switch
off the receiver.
2  
Select one of the 12 available radio channels by pressing the arrow keys  or  repeatedly, if necessary.
LED DISPLAY
3
The selected radio channel is shown in the display (01 – 12).
IR
4
Infrared interface for synchronising the radio channel of the receiver and handheld or pocket transmitter.
SYNC
5
Synchronising receiver and handheld transmitter
To synchronise the radio channel of the receiver and the hand-held transmitter, select the desired radio
channel on the receiver, switch on the hand-held transmitter and then press the SYNC button while
pointing the infrared interface of the hand-held transmitter in direct visual contact with the infrared
interface of the receiver. The infrared interface of the hand-held transmitter is located on the underside
of the hand-held transmitter. If the synchronisation was successful, the red indicator LED RF on the
receiver will now light up.
Synchronising receiver and bodypack transmitter
To synchronise the radio channel of the receiver and the bodypack transmitter, select the desired radio
channel on the receiver, switch on the bodypack transmitter and then press the SYNC button while
pointing the infrared interface of the bodypack transmitter in direct visual contact with the infrared
interface of the receiver. The infrared interface for synchronising the radio channel of the receiver
and transmitter is located in the battery compartment. To open the battery compartment, press both
markings on the sides of the battery compartment cover simultaneously and fold it forwards. If the
synchronisation was successful, the red RF indicator LED on the receiver lights up.
RF indicator LED
6
As soon as there is a radio connection between the transmitter and receiver, the red RF LED lights up.
AF indicator LED
7
The green AF LED indicates an audio signal is present.
22
5 4
1
8