Descargar Imprimir esta página

Levenhuk Wezzer PRO LP310 Guia Del Usuario página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
Rain gauge (precipitations), units of measurement
Precipitations measurement range
Screen
Time format
Radio signal frequency
Radio signal radius
Transmission signal
Power supply (base station)
Power supply (multisensor)
The manufacturer reserves the right to make changes to the product range and specifications without prior
notice.
Uploading live data to the Internet
The console is capable of transmitting data from sensors to selected Internet weather forecast services.
Supported services are listed in the table below:
Service
Ecowitt Weather
Weather Underground
Weather Cloud
Weather Observation Website (WOW)
Please note: Regarding the online meteorological services, the user will only be able to see the basic weather
parameters outside (depending on the online service used).
Connecting the weather station to Wi-Fi
When setting up console credentials and updating firmware, keep the distance between your smart device
and console within 5m as connection is based on Bluetooth during this time. Further settings (current data,
calibration, date, time zone, etc.) occur via the WLAN network.
Wi-Fi requirements:
Requires an active Wi-Fi network with a frequency of 2.4GHz.
The router must support the 802.11b wireless standard with a 2MHz frequency.
Downloading the mobile app:
Install the WS View Plus app via the Apple App Store or Google Play.
Register in the application.
Allow access to location and Wi-Fi network.
Connecting your console to Wi-Fi using Bluetooth Low Energy (BLE):
Press and hold TEMP/+ and LIGHT simultaneously for 2 seconds to enter setup mode. The icon
will appear in the DATE section of the screen.
Open the app on your smart device.
Select the option to add a new device.
Find the weather station using the automatic search function. The last 4 characters of the weather
station name are identical to the last 4 characters of its MAC address.
Enter the Wi-Fi network password, make sure you are using the 2.4GHz frequency.
Wait for the connection process to complete.
Registration on weather services (optional):
Once connected to Wi-Fi, you can register the weather station with online weather services such
as ecowitt.net, wunderground.com and others.
To register, you will need the MAC address of the weather station.
Setting up weather services (optional):
Open the mobile app and select your device.
Go to the "Download data" section and configure the necessary weather services.
Enter the required data for each service following the instructions in the app.
mm, in
0−9999mm (0−393.6in)
monochrom LCD
24 hours, 12 hours
433MHz
100m (328ft.) (in an open area)
60s (indoors), 16s (outdoors)
DC 5V (USB power cable included),
2pcs alkaline AA batteries
2pcs alkaline AA batteries
Website
https://www.ecowitt.net
https://www.wunderground.com
https://weathercloud.net
http://wow.metoffice.gov.uk
14

Publicidad

loading

Este manual también es adecuado para:

82931