Removing And Installing The Doors; Additional Technical Data; Technical Data - Haier HRF-521D 6 Serie Manual De Usuario

Installation

Removing and installing the doors

In the event that you need to remove the appliance doors, please follow the door removal
and installation instructions below.
WARNING!
▶ Before any operation, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶ The appliance is heavy. Always handle with at least two persons.
▶ Do not tilt the appliance more than 45° or place it horizontally on the ground
1. Undo the hinge cover screw and remove
1.
2. Undo the screws holding the upper hinge in posi-
2. 3.
3. Lift the freezer compartment door to remove it.
4. Refit the door by reversing the removal steps. En-
Notice
The pictures show the removing of the freezer compartment door. For the refrigerator
door please use the corresponding parts on the other site.
30
the cover. Release the cable connector.
tion and then remove the hinge.
sure that the grounding cable will be fixed by the
screw.
GB GB
Product fiche according to
Trade mark
Model identifier
Category of the model
Energy efficiency class
Annual energy consumption (kWh/year)
Storage volume cooling (L)
Storage volume freezing (L) ****
Star rating
Temperature of other compartments > 14°C
Frostfree system
Temperature rise time (h)
Freezing capacity (kg/24h)
Climate class
This appliance is intended to be used at an
ambient temperature between 10 °C and
43°C.
Airborne acoustical noise emissions
(db(A) re 1pW)
Construction type
* Color code
based on standard test results for 24 hours. Actual energy consumption will depend on
1)
how the appliance is used and where it is located.

Additional technical data

Voltage / Frequency
Input power (W)
Main fuse (A)
Coolant
Dimensions (H/W/D in mm)

Technical data

regulation EU No. 1060/2010
Haier
HRF-521D*6
Refrigerator-freezer
A+
1) 435
341
177
Non applicaber
Yes
5
12
SN-N-ST-T
43
Freestanding
220-240V ~/ 50Hz
200
15
R600a
1790 /908 /655
31