Kenwood CHP80 Instrucciones página 9

English
Safety
Read these instructions carefully and retain for future
reference.
Before using for the first time, remove all packaging
and any labels including the plastic blade covers. Wash
the parts: see 'Cleaning'.
If the plug or cord is damaged it must, for safety
reasons, be replaced by Kenwood or an authorised
Kenwood repairer in order to avoid a hazard.
The blades are sharp, handle with care. Always hold
the knife blade at the top, away from the cutting
edge, when handling the sharp cutting blades,
emptying the bowl and during cleaning.
DO NOT process hot ingredients.
Be careful if hot liquid is poured into the mini
chopper bowl as it can be ejected out of the
appliance due to sudden steaming.
Always switch off the appliance and disconnect
from the power supply, if it is left unattended, before
assembling, disassembling or cleaning.
When processing heavy loads such as meat do not
operate continuously for longer than 15 seconds.
Leave to cool for 2 minutes in between each
15 second operation.
Do not exceed the maximum capacities stated in the
R S
processing guide (refer to illustration ).
–
Always wait for the blades to completely stop before
removing the power unit from the bowl.
Always remove the knife blade(s) before emptying or
pouring contents from the bowl.
Never use a damaged appliance. Get it checked or
repaired: see 'Service and customer care'.
Never let the power unit, cord or plug get wet.
Do not let excess cord hang over the edge of a table
or worktop or touch hot surfaces.
Do not operate the food chopper if the bowl is empty.
Never operate the food chopper with the bowl filled
with liquid.
Do not use the bowl as a storage container.
Never leave the appliance on unattended.
Misuse of your food chopper can result in injury.
Never use an unauthorised attachment.
Ensure the cord is fully unfolded from the cord storage
compartment before using the appliance.
Children should be supervised to ensure that they do
not play with the appliance.
2