Publicidad
Receiving frequency band
the SW demodulation
mode is AM/CB two
working modes
Main screen displays main menu and
8 task displays
ANT-KEEP-PASS
(Antenna channel pass-through)
ANT-CHANNLE
(Antenna channel selection)
ANT-LNA1-GAIN
(LNA1 antenna channel gain selection)
ANT-LNA2-GAIN
(LNA2 antenna channel gain selection)
ATT-GAIN
(Antenna attenuation selection)
SQL-LEVEL
WT-SCAN-MODE
ANT-DEFAULT （Default antenna)
Submenu selection operation instructions
Press and hold the [
"ANT-KEEP-PASS" interface is displayed on the main screen.
Press the shuttle button [
displayed, indicating that the setting is completed.
Press and hold the [
"ANT-CHANNLE" interface is displayed on the main screen.
Press the shuttle button [
and select :
ANT-LPF (HPF filter)
ANT-LNA1 (LNA1 channel)
After selecting, lightly press the shuttle button [
confirm, and SETTING OK will be displayed, indicating that
the setting is completed.
Press and hold the [
-GAIN" interface is displayed on the main screen.
Press the shuttle button [
and rotate the shuttle button [
ANT- LNA1 -GAIN-L ( LNA1 antenna channel low gain )
ANT-LNA1-GAIN-H ( LNA1 antenna channel high gain )
After selecting, lightly press the shuttle button [
confirm, and SETTING OK will be displayed, indicating that the
setting is completed.
Press and hold the [
-GAIN" interface is displayed on the main screen.
Press the shuttle button [
and rotate the shuttle button [
ANT- LNA 2-GAIN-L ( LNA 2 antenna channel low gain )
ANT-LNA2-GAIN-H ( LNA 2 antenna channel high gain )
After selecting, lightly press the shuttle button [
and SETTING OK will be displayed, indicating that the setting is
completed.
Press and hold the [
interface is displayed on the main screen.
Press the shuttle button [
and rotate the shuttle button [
ANT-10DB: Antenna attenuation 10DB
ANT-20DB: Antenna attenuation 20DB
After selecting, lightly press the shuttle button [
and SETTING OK will be displayed, indicating that the setting is
completed.
Press and hold the [
"SQL-LEVEL" interface is displayed on the main screen.
Press the shuttle button [
and rotate the shuttle button [
SQL-LEVEL 00-01-02-03-04-05-06-07-08-09 (9-level
squelch selection)
After selecting, lightly press the shuttle button [
confirm, and SETTING OK will be displayed, indicating that the
setting is completed.
Press and hold the [
-MODE" interface is displayed on the main screen.
Press the shuttle button [
rotate the shuttle button [
WT-SCAN-MODE-FREQ frequency scan mode
WT-SCAN-MODE-PRESET Prestored radio station scanning
mode
After selecting, lightly press the shuttle button [
and SETTING OK will be displayed, indicating that the setting is
completed.
Press and hold the [
"ANT-DEAULT" interface is displayed on the main screen.
Press the shuttle button [
indicating that the setting is completed.
11
] key for 2seconds until the
] lightly, SETTING OK is
] key for 2seconds until the
] lightly to enter the submenu
] key for 2seconds until the "ANT-LNA1
] lightly to enter the submenu,
] to select:
] key for 2seconds until the "ANT-LNA2
] lightly to enter the submenu,
] to select:
] key for 2seconds until the "ANT-GAIN"
] lightly to enter the submenu,
] to select:
] key for 2seconds until the
] lightly to enter the submenu,
] to select:
] key for 2seconds until the "WT-SCAN
] lightly to enter the submenu, and
] to select:
] key for 2seconds until the
] lightly, SETTING OK is displayed,
] to
] to
] to confirm,
] to confirm,
] to
] to confirm,
Publicidad
