Publicidad
[ number key ]
EN
[ Push lock ]
[ TF card jack ]
[ Headphone output ]
[ Audio input ]
[ TYPE-C hole ]
[ Right ]
1: Radio mode:
1-1: Frequency click: non-channel mode, press the [EN] key lightly to enter the numeric
key frequency click, press the [EN] key to confirm.
1-2: Retrieve the station: After saving the radio station, enter the valid station address
number and press the [EN] key to directly retrieve the station.
You can also press the [PRESET] key to enter the station retrieval mode, press the numeric
keys to retrieve the valid radio station address number, and press the [EN] key to confirm.
1-3: Select the station number for manual station saving: long press the [PRESET] key to
enter the manual station saving mode, press the numeric keys to select the station address
number, and lightly press the [PRESET] button to confirm.
2: TF card mode: After lightly pressing the number keys to select a song, lightly press the
[EN] key to select the track to play.
1: Radio working mode: After lightly pressing the [EN] key, enable the digital key to click the
frequency. After clicking the frequency, press the [EN] key again to confirm.
2: TF card playback mode: After selecting a song directly with the numeric keys, tap [EN] to
confirm the selected song for playback.
1: Pull the switch to the "UN " position and the key will not be locked.
2: Pull the switch to the "RS-LOCK " position and lock the pulley rotating knob.
3: Pull the switch to the "...LOCK" position, and all buttons and rotating knobs are locked
(locked state).
Power-on state: Tap EQ Sound quality: NORMAL, POP, ROCK, JAZZ, CLASSIC, COUNTRY,
NEWS, VOICE ), analog output (DAC-ANALOG) switching, CW (filter)
Power-on working mode: Insert the TF card and automatically play TF card songs first.
Power-on working mode: Plug in 3.5MM headphones to listen to the program, cut off
the external sound,
Power-on working mode: Plug in the 3.5mm external audio source input, and the external
audio source music will be automatically played first.
1: Charging hole ( external DC 5V power supply for charging )
AUX-IN ) on the computer
3: Connect the computer with a data cable and use it as a TF card reader
Medium wave, short wave, when connecting an external T-shaped antenna, adjust the
signal-to-noise ratio and antenna field strength. The higher the RSSI and SNR values, the
better.
04
Publicidad
