Publicidad
1: Set the time function, see point 12 for details.
2: In the menu setting, the main screen of the radio is on for 5 seconds to 30 seconds [see
Operation Point 14 for details; A-LCD SETTING Operation Introduction]. Tap [TIME/SET] to enable
the backlight to stay on, and the "
home screen. Tap [TIME/SET] again to turn off the continuous lighting. The "
TIME/SET
disappear and the set backlight screen time will be restored.
3: When the menu is set, the main screen of the radio is always on (FULL is selected). For details,
please refer to Operation Point 14; A-LCD SETTING Operation Introduction], the lower left corner
of the main screen displays the "
the backlight on for 30 seconds and then turn off the screen. Press the [TIME/SET] key again to
switch to the steady state.
1: Set the alarm clock function. For details, see point 13 for the operation introduction.
2: In the menu settings, the radio secondary screen is on for 5 seconds to 30 seconds [see
Operation Point 14 for details; B-LCD SETTING Operation Introduction]. Tap [ALARM] to enable
the backlight to stay on, and the "
home screen. Tap [[ ALARM ] again to turn off the constant lighting. The "
disappear, and the set backlight screen time will be restored.
ALARM
3: When the menu is set, the radio secondary screen is always on (FULL is selected). For details,
please refer to Operation Point 14; B-LCD SETTING Operation Introduction]. The "
displayed in the lower left corner of the main screen. Press the [ALARM] button lightly to quickly
turn the backlight on for 30 seconds and then turn off the screen. Press the [ALARM] key again to
switch to the steady state.
1: Clock mode/Bluetooth & TF card playback mode: Tap to view the time set by the alarm clock.
DISPLAY
2: Radio working mode: Tap to display the time/radio reception signal strength.
Power on state: light press/long press: volume increases.
Power on state: light press/long press: the volume decreases.
1: Radio mode (except WB) mode: Press and hold for 2 seconds to enter fully automatic station
search/store.
2: VHF/UHF/AIR/CB/LSB/USB playback mode: Press this button lightly to enter the automatic
scanning and search radio mode (SCAN-FREQ mode), and scan for radio stations with signals; if
no valid signal radio is scanned, the While searching; until you tap the key again to exit scan mode.
3: WB playback mode: Press and hold for 2 seconds to turn on/off automatic search for North
American weather radio stations.
1: Enter the menu settings in power-on mode. See 7.3.10 Operation Introduction for details.
2: Time display enters the menu setting. Details are explained in point 14.
1: In radio mode, enter the station retrieval mode: long press for 2 seconds to delete the station.
2: After internal recording, enter the TF card playback mode, select the recording file to be
deleted, press and hold for 2 seconds, after the main screen displays the del character, tap again
to confirm deletion.
3: When you enter the wrong number for the radio number frequency/the wrong number for the
TF card number to select the song, tap to remove the wrong number.
1: Press and hold for 2 seconds to enter the station saving mode, tap again to confirm saving the
station.
2: Tap to enter the channel retrieval mode;
1: Radio working mode: Press lightly: The frequency increases according to the minimum step
value of each band. Press and hold for 2 seconds to enter the upward automatic search station.
2: TF card playback mode: tap to enter the next song; long press to fast forward playback.
3: Bluetooth playback mode: Tap to enter the next song.
1: Radio working mode: Press lightly: the frequency decreases according to the minimum step
value of each band. Press and hold for 2 seconds to enter the automatic search station
downwards.
2: TF card playback mode: tap to return to the previous song; press and hold to rewind playback.
3: Bluetooth playback mode: Tap to return to the previous song.
1: Radio working mode: Turn the inner and outer shuttle knob to select the radio point.
2: Press the inner wheel button lightly
time to select the required step value, and rotate the large shuttle button
Small and
decrease the frequency.
large shuttle
3: Rotate the inner wheel knob
button
knob to quickly adjust to the target frequency.
4: When playing the TF card, you can rotate the inner and outer pulleys to select songs, and press
the button to confirm the final selection
5: When setting time/alarm clock/menu settings, select settings according to the task command.
" symbol will be displayed in the lower left corner of the
" symbol. Press the [TIME/SET] button lightly to quickly turn
" symbol will be displayed in the lower left corner of the
, and the STEP value changes. Press the button each
, the last number of the frequency flashes, turn the inner wheel
.
03
" symbol will
" symbol will
" symbol is
to increase or
Publicidad
