BESAFE Beyond Base Manual Del Usuario página 7

Preparing the vehicle for installation on the back seat
1.
Bring the backrest of the back seat into upright position (if applicable to
your car).
2.
To give yourself space for the installation, move the front seat forward as
far as possible and put it into upright position if needed.
3.
Position the vehicle on a horizontal surface when installing the seat.
Preparing the vehicle for installation on the
passenger seat
1.
Adjust the backrest of the front seat into an upright position.
2.
ALWAYS deactivate the front airbag. If this is not possible in your vehicle,
you cannot install this seat on the front seat.
3.
Move the front seat and/or adjust the front brace position, so that the
dashboard is close to touchpoint with the back of the child seat. Make
sure that the child seat can still rotate freely. If this is not possible, then
you should move the front seat as far back as possible, so that you
have a preferable minimum distance of 25 cm between child seat and
dashboard.
BeSafe Beyond Base | 7