BESAFE Beyond Base Manual Del Usuario página 9

6.
Adjust the floor support, so it is in contact with the floor of the vehicle. (1)
7.
The floor support indicator shows green when the floor support is in
contact with the floor. You also hear a click-sound. (2)
8.
Lift the base at the front side (near the spirit level) and extend the floor
support till the spirit level is in the green area, indicating a horizontal or
upright enough position. (1, 3)
9.
For a horizontal position we recommend the spirit level bubble to be in
the middle between the lines. (3)
10.
Tip: place one foot onto the bottom end of the floor support while lifting
the base to make adjusting the length at this step easier. (1)
11.
If it is easier in your car, you can also do step 5 to 10 in reverse order,
meaning: first lift the base into horizontal position, then push it against
the backrest.
12.
If you feel like the base has too much side movement, you can push it
towards the backrest side to side, so that you hear one or two more
click-sounds per side. Make sure the base is straight and not crooked to
one side when finished. (4)
1
4
Click!
2
Click!
3
Click!
BeSafe Beyond Base | 9