Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
•Do not operate the machine in rooms with a temperature of
below 5°C. This can cause damages to parts of it. If it is
unavoidable, make sure to drain the water completely from
the appliance after every use (see
„Maintenance - Cleaning of drain pump filter") to avoid
damages caused by frost.
•Never use flammable sprays or substances in the immediate
proximity of the appliance.
INSTALLATION
•Remove all packaging material and transport bolts before
using the appliance. Otherwise, serious damage may result.
•This appliance is equipped with a single inlet valve and can be
connected to the cold water supply only.
•Mains plug must be accessible after installation.
•Before washing clothes for the first time, the product shall be
operated once throughout all the procedures without any
clothes inside.
•Do not put any excessively heavy objects on the appliance, like
water containers or heating devices.
•The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
•Max. Inlet water pressure 1 MPa. Min. inlet water pressure
0.1MPa.
ELECTRICAL CONNECTION
•Make sure the supply cable is not trapped by the
machine, it can get damaged.
•Connect the product to a grounded outlet protected by a
fuse complying with the values in the " Technical
specifications" table. The grounding installation has to be
made by a qualified electrician. Ensure that the machine is
installed in accordance with the local regulations.
4
V. 1
Publicidad
