Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Quick Start
Caution!
• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any
residual water and to neutralize potential odors, it's recommended to clean
your appliance before first use. For this reason, recommended to clean the
inner drum by running the Limp. Tambor or other program with the optional
temperature of 90°C. Be careful not to put laundry and detergent in the
machine.
1. Before Washing
1
Plug in
4
Prewash
Softener
Main wash
Add detergent
• Check the roller before each laundry ,it must
roll smoothly.
2. Washing
1
Select
Power On
programme
2
Open tap
5
Close
drum door
machine door
2
Select function
or remain
default settings
3
• Detergent need to be added
in "case I "after selecting
pre-washing for machines
with this function.
• Make sure that the drum
flaps are properly locked.
Load
6
• All metal hooks must be
properly hooked inside the
rear door flap.
Close
3
Press
Iniciar/Pausar
to start the
program
14
Note!
Note!
4
• Step 3 is optional.
3. After Washing
Buzzer beep or "End" on
display.
V. 1
Publicidad
