Sharp UA-KIN52E Manual Del Usuario página 11

BEFORE FIRST USE
• To maintain the quality of the filter, it is installed in the product and packaged in a plastic
bag.
• Be sure to stop operation and unplug the product before filter installation or replacement.
FILTER INSTALLATION
1.
Remove the
Back Panel.
2.
Take out the filters from the plastic
bag.
Deodorizing
HEPA Filter
Filter
3.
Install the filters in the correct order
as shown.
HEPA Filter
4.
Install the Back
Panel.
NOTE
• When replacing the filters, making a memo of
the start of use date is recommended.
• Do not operate the product without the filters.
Back Panel
(Only UA-KIN52E)
Tag
Deodorizing Filter
Click
Click
EN-9
REFILLING THE WATER
TANK
1.
Remove the Water Tank.
Tank Handle
Water Tank
2.
Fill the Water Tank with the tap water.
Tank Cap
満水
3.
To prevent leaks,
securely tighten the
Tank Cap.
4.
Install the Water
Tank.
FULL
Click