Sharp UA-KIN52E Manual Del Usuario página 25

PLASMACLUSTER ION GENERATING UNIT
REPLACEMENT AND MAINTENANCE CYCLE
Parts Name
Plasmacluster Ion
* 1
Generating Unit
*1: In the following, "Plasmacluster Ion Generating Unit" is abbreviated as "Unit".
*2: The replacement time will be announced by the Unit Replacement lamp.
*3: Designated App notifies when each replacement part should be replaced according to usage.
MAINTENANCE
1.
Remove the Unit Cover, and pull out
the Unit Holder.
2.
Remove dusts from the Electrode
Section.
Electrode
Before
cleaning
Electrode
Around the base
3.
Insert the Unit Holder in the product,
and install the Unit Cover.
Maintenance Cycle
Every 6 months or more often if
necessary
Unit Cleaning Brush
Unit Cleaning Brush
After
cleaning
Click
Max Service Life
19,000 hours
NOTE
• Do not clean with anything other than the Unit
Cleaning Brush. Doing so could lead to failures
in the Unit.
• A bent electrode could be cut off and dropped
during the cleaning process, but it will not
change the performance.
• Do not touch the electrode directly. Doing so
could lead to pain / itching.
• Do not transform the Electrode Section. Doing
so can damage it.
• Do not touch the Connection Terminals. Doing
so can damage them.
REPLACEMENT
Unit Replacement lamp
When the total operation time exceeds 17,500
hours, the Unit Replacement Lamp will flash to
indicate that the Unit needs replacement.
Operating time
17,500 hours
Flash slowly
19,000 hours
Flash quickly
* The replacement time is not related to the selected
operation mode.
EN-23
(Electrode Section)
Replacement Model
* 2,3
UZ-C90M
Connection Terminals
Explanation
Replace the Unit
No Plasmacluster ions will
be released by the Unit.