Sammic MO-1817S Manual De Instrucciones página 22

EN ES
3) Setting Program: Press number button to set the program. 2
seconds later, the screen will display the time associate with
that number button.
4) Input the time: Press number buttons to input time.
5) Press "POWER LEVEL" button, "%POWER" displays. Press
number buttons to select power level you want, and the corres-
ponding power will light. If you want to choose full power level,
press "1" and "0" successively. Then the screen will display
"100%POWER". If no power chosen, 100% power is default.
Note: Set the time first, then choose the power.
6) After setting the time and power, press " ", the cooking pro-
gram will be saved. When the program saved, "PROGRAM"
displays.
7) If all the cooking time exceeds the MAX. time User Option 7,
when press " " to save the program, the buzzer will sound
three times briefly to tell you the time is no use. And then the
screen turn back to display "PROGRAM". The time set before
will be no change.
8) Close the door, the oven will turn back to Ready Mode.
If press " " button during setting process, the oven turn to
Door Open Mode.
The program that not saved will be lost. If there is program
saved as memory procedure, press the related number button,
the saved program will start. If no saved program, the buzzer
will alarm when pressing number button and it will not work.
For example: set the program as memory cooking. Power level
70% and cooking time is 1 minute and 25 seconds
Step 1: Open the door, press number button "1" for 5 seconds,
"PROGRAM" displays.
Step 2: Press number button "3", the screen will display "P:03".
After two seconds, the screen will display the related time
":30".
Step 3: Press number buttons "1", "2" and "5" to input the cooking
time.
Step 4: Press "POWER LEVEL" butond and press "7" button, "1:25
70" displays. Setting finished
Step 5: Press " " to save. When use the program next time, just
press "3", the related program will start.
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset, just repeat the above steps.
3. If press " " at the last step, it will turn back to Ready Mode.
The setting will be no use.
Double/Triple Quantity cooking
14.
1) If the "X2" or "X3" button is pressed in Ready Mode, followed
by the starting of a Preset Program, or if the "X2" or "X3" but-
ton is pressed in 5 seconds of starting a Preset Program, the
oven will start cooking with the quantity preset cooking time.
2) Press "X2", "DOUBLE" displays. Press "X3", "TRIPLE" dis-
plays. When press number buttons, the screen will display the
quantity preset time.
For example, number button "5" and its preset time is 1 minute.
Then press "X2", then time will change to 1:00*2=2 (2 minutes)
3) When cooking program finish, the oven will enter End of Cook
Cycle Mode.
Stage Cooking Programming
15.
This allows the user to cook food items at manual cook mode
and programming mode.
1) Three stages can be set at most under cooking mode or pro-
gramming mode.
After setting the power and time for the first stage, press
"Time Entry" to set the second stage. And the same step
to set the third stage.
2) When setting the second, third stage, press "Time Entry",
"STAGE-2", "STAGE-3" displays.
3) Press " " button to start cooking.
Example: In programming mode, press number buttons "3" to set
two stages cooking. The first stage is PL7 and time is 1 minute 25
seconds. The second stage is PL5 and 5 minutes and 40 seconds.
The steps are as follows.
a. Open the door, press number button "1" for 5 seconds,
"PROGRAM" displays.
b. Press number button "3", the screen will display "P:03".
After two seconds, the screen will display the related time ":30".
c. Press "1", "2", "5" to input the cooking time. "1:25" displays.
d. Press "POWER LEVEL" buttorn and press "Med-Hi 70%", "1:25
70" displays.
The first stage is finished.
e. Press "Time Entry", "STAGE-2" displays.
f. Press "5", "4", "0" button, "5:40" displays.
g. Press "POWER LEVEL" buttorn and press "Medium 50%",
"5:40 50" displays.
The second stage is finished.
h. Press " " button to start cooking.
i. The total time counts down.
16. Filter Cleaning Function
1) If User Option OP:01 is selected and the setting time arrives,
the oven will remind the user to cleaning the filter.
Note: The oven must be electrified.
2) The screen will display "CLEAN FILTER". At this time, pressing
" " button or opening the door will put the oven into Ready
Mode.
3) If you do not need to clean the filter, press "
for 3 seconds to clear out the reminder information. Otherwise,
the oven will remind you all the time during Idle Mode.
Use Option Mode
17.
This allows the user choose between various ways for the oven
to operate.
1) Open the oven door and press "2" pad for 5 seconds. The
buzzer sounds once and enter this mode.
2) The screen displays "OP: - -".
3) Press any number button to enter related mode setting.
For example: to set the voice of the buzzer to medium. Press
"2", "OP:22" displays.
If you want to change, keep pressing "2", the screen displays
"OP:20", "OP:21", "OP:22", "OP:23", "OP:20" in cycle.
4) Press " " to save the current setting. After saved, "OP: - -"
display again.
5) During setting process, press "
Close the door will enter Ready Mode.
22
- 22 -
" button and hold
" to enter Door Open Mode.