Sanyo DS27930 Manual Del Propietário página 18

HELPFUL HINTS (Problems/Solutions)
Before calling for assistance, please check the condition that most closely resembles your problem in the
following chart, then try the solutions for that condition. Visit our Web site at
www.sanyoctv.com
or call toll free 1-800-877-5032.
Problem:
TV turns off
automatically.
Check these Conditions:
• Check signal (CablelAnt.) connection.
• Power surge protection feature.
Try these Solutions:
• Press POWER key.
• The sleep timer may have been set,
• Unplug TV momentarily,
• Adjust antenna,
• Try a different channel,
• Press RESET key,
• Turn off Mixer, Drill, Blender, etc,
• Channel may be removed from memory.
• Check antenna connections.
• V-Guide is set to block
programming (see pages 15 - 16),
• Check if station is broadcasting a Closed-
Caption signal. Select another channel.
• May be a different language is selected.
No picture, poor • Check antenna connections.
picture, or wavy lines • May be station trouble.
in picture, • Brightness or Contrast misadjusted.
• Possible interference from household
appliance,
Black box on screen, • Caption Text Mode without display • Press RESET key twice.
information, • Switch OFF Captions (see page 17),
Poor color or • Check if prograrn is in color, • Try a different channel,
no color, • Check antenna connections, • Adjust antenna,
• Color or Tint misadjusted, • Press RESET key twice,
• May be station trouble,
Blue Screen with • Check Audio/Video connections, • Press INPUT key,
Video1, Video2 or • Check external equipment connections, • Switch on external equipment,
Component 3 displayed, • Check DVD setting, • Set DVD component output to interlaced,
No sound, poor sound. • May be station trouble, • Try a different channel,
No sound on some • May be MUTE function. • Adjust Volume.
channels. • Check Audio/Video connections. • Press RESET key twice.
No TV stereo sound. • Check if station is broadcasting a true MTS • Select Stereo from Audio on-screen
stereo signal, menu.
No TV SAP sound. • Check if station is broadcasting a SAP signal. • Select SAP from Audio on-screen menu.
No Cable channels • Cable Channel Indicator C should appear • Select Cable from Antenna on-screen
above number 13. next to channel number, menu; then start CH. (channel) Search
using the menu.
No UHF channels, • Cable Channel Indicator C should not • Select VHF/UHF from Antenna on-screen
VHF OK, appear next to channel number, menu; then start CH. (channel) Search
usin 9 the menu,
Cannot select or scan • Select CH. Scan Memory and manually add
some channels, channels or start CH, (channel) search.
• Press RESET key to clear settin 9.
• Set V-Guide to OFF or press RESET key,
No Captioning. • Select Caption1 or Caption2 (see page 17).
Menu System words • Reselect menu language choice using the
seem misspelled, on-screen menu or press RESET key.
Remote Control • Check batteries, then see if TV is plugged in. • Replace batteries.
will not work TV. • Press TV key. • Aim remote control at front of TV.
Remote Control will • Press VCR, CABLE, DVD, SAT, or AUX key. • Re-enter brand code (see pages 9--11).
not operate VCR, Cable Check external equipment.
Box, DVD, and Satellite •
Receiver.
Cabinet makes
popping sound.
• This is a normal condition during warm-up and cool
down of the plastic cabinet parts,