Sanyo DS27930 Manual Del Propietário página 7

USING THE MULTIMEDIA REMOTE CONTROL
Operates your TV, VCR, DVD, Cable converter box, and Satellite Receiver. To program
the remote control, see pages 9 -- 11.
INSTALL BATTERIES AS SHOWN
(2 AA, not included)
Notes:
Do not mix old batteries with new ones o1"mix different types of
batteries together.
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed
of properly in compliance with all applicable laws. For detailed information
contact your oca County So d Waste Author ty.
REMOTE CONTROL KEYS
@Mode Keys--Use keys to program
these the
remote control and to select the operating mode
(VCR, T_ C>IBLE, DVD, 5:4T, or A55Y). To
Operate Your... VC_Press the VCR key;
Television Press the TV key; (?able Bo_Press
the CABLE key; DVD Player Press the DVD key;
and Satellite Receiver
Press the SAT key.
Note: Make sure you hold down the mode key
while entering a code ]lumber, see page 9.
Input the and Satellite this Key--In
TV
modes,
key selects the program source to display on the
screen (TV signal or signal from equipment con-
neeted to the AV jacks). In the VCR mode, this key
functions as a VCR's TVVCR key.
Number Keys--Two keys must pressed to
be select
a channel. Example: Press 0 then 6 to select channel
6. For cable channels 100 through 125, press and
hold the 1 key until C1 appears. Then press the
other two numbers.
Caption Key See page 17.
• Be sure batteries are
installed correctly.
• Point the remote
control toward the
equipment you want to
operate. Objects bet-
ween the remote
control and the equip-
ment may cause
miseperatien of the
remote control
function.
• It the remote control
does not work: Press
TV key (see item 1).
• The remote control
must be programmed
before it will operate
your VCR, OVO
Player, Satellite
Receiver, or Cable
Box. See pages 9,-,11.
Note. Sanyo's VCR
and OVD codes are
preprogrammed.
• Cannot select
channel with number
keys. Press "O"in
front of numbers 1~9.
Example. Channel 05.
• Adjusting the volume
level. Flashing Right
• arrow indicates
volume is increasing
and flashing Left
• arrow indicates
volume is decreasing.
Need he/p?
Visitour Websiteat
www.sanyoctvxom
or Call %800-877-5032
(Continued on page 8.)