GE Profile 23 Manual Del Propietario E Instalación página 11

ge.eom
Not all Features are on all models.
Freezer Baskets
To remove, push the basket all the wag to
the back of the freezeELift up until the back
pins are disengaged. Lift the entire basket up
and pull out.
lake sure you push the baskets oil
the wag back in before _lOUclose the door.
Slide-Out Freezer Shelves
To remove, slide out to the stop position,
lift the front past the stop position and
slide out.
lake sure you push the shelves all the wag
back in before _lOUclose the door.
Fixed Freezer Shelves
There are two types of fixed
freezer shelves.
To remove this type of shel_
Liftthe shelf up at the left side.
0 Bring the shelf out.
To remove this type of shel_
Lift up the left side of the shelf and slide it
left into the center of the shelf supports.
Rotate the right side of the shelf up
and out of the shelf supports.
NOTEFORDISPENSER MODELS:tn order to
take full advantage of the tilt-out ice bin, only
store items on the shelf below the ice bin that
are no taller than the lowest point on the bin.
Door Wine/Beverage Reck ton some models)
This rack holds up to 5 cans or one bottle To replace:
of wine. _ Reattach the rack to the sides
The rack hangs from the sides of the of the bin.
Engage the back side of the bin in
Todairgremove:bin _ the molded supports on the dooE
Empty the wine/beverage rack. Then push down on the front of the bin.
The bin will lock into place.
Holding the bottom of the dairy bin,
lift the front straight up, then lift up
and out.
To detach the rack from the dairy bin,
pull the rack's sidewires out of the holes
on each side of the dairy bin.
11