GE Profile 23 Manual Del Propietario E Instalación página 7

About CustomCooL'%n somemodels)
ge.com
Non-LCD Models Only
\ How it Works
The CustomCool T" f eature is used to quickly
chill items, thaw items or hold the pan at a
specific temperature. This feature is a system
of dampers, a fan, a temperature thermistor
and a heateE
LCD Models Only
How to Use
0 Empty the pan. Placethe Chill/Thaw trag
in the pan. Place the items on the tray
and close the pan completelg.
LCD Models:
Access by: Home > Options >
Refrigerator Options > CustomCool Pan
ExpressThaw _"
ExpressChill_"
Non-LCD Models:
Select the ExpressThowT',ExpressChilP'
or SelectTemp_"pad. The displag and SET
light will come on. Tap the pad until the
light appears next to the desired setting.
Use the following chart to determine the
best setting to use.
!;_:ExpressChill can be set to 15,30 or 45
minutes. The default is 15 minutes.
iJi:: T o stop a feature before it is finished:
For LCD Models:
Go into that feature's menu and press
the OFF button.
OR LCD Models Only
The pan is tightlg sealed to prevent
temperature fluctuations in the rest of
the refrigeratoEThe controls for this pan
are located on the dispenser with the
temperature controls.
For Non-L CD Models:
Tap that feature's pad until no options
are selected and the displag is off.
During ExpressThow and
ExpressChill,the displag on the
controls will count down the time
in the cgcle (on some models).
After the ExpressThaw cgcle is
complete, the pan will reset to the
MEATsetting (32°F[0°C])to help
preserve thawed items until theg
are used,
The displaged actual temperature of
the CustomCool pan mag varg slightlg
from the SETtemperature based on
usage and operating environment.
NOTE:For food safety reasons, it is
recommended that foods be wrapped in
plastic wrap when using ExpressThow.
This will help contain meat juices and improve
thawing performance.
How to Remove and Replace the Drawer
To remove:
Pull the drawer out to the stop position.
0 Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out,
To replace:
Hake sure all four swing locks are in
the unlock position.
Place the sides of the drawer into
the drawer supports, making sure
the swing locks fit on the drawer slots.
Lock all four swing locks bg rotating them
to the lock position.
t_
0
iiiiiiii_]iiiiiiil
:b-
oo
¢b
o
R