GE Profile 23 Manual Del Propietario E Instalación página 5

About the temperature controls.
Not all features are on all models. Your controls will look like one of the following:
f
Non-LCD models LCD models
NOTE: Therefrigerator is shipped with protectivefilm covering thetemperature controls. I f this film was not
removedduringinstallation, removeit now
ge.com
Thetemperature controlsarepresetin the factoryat 37°F(3°C)
forthe refrigerator c ompartmentand O°F (-18°C) forthe freezer
compartment. A llow24 hoursforthetemperature to stabilize
to thepresetrecommended settings.
Refrigerator t emperatures c an beadjusted between34°Fand 46°F
(1 °Cto 8°C), a ndthe freezer temperatures c anbe adjustedbetween
-6°F and+8°F(-21 °Cto -13°C).
To change the Refrigerator temperature:
LCD Models:
Access By: Home > Refrigerator
Activate By: Using the arrows to select the desired
temperature. You must press ENTER to set the new
temperature.
To change the Freezer temperature:
Access By: Home > Freezer
Activate By: Using the arrows to select the desired
temperature. You must press ENTER to set the new
temperature.
Once the desired temperature has been set, the display will
return to the HOME screen and show the set temperatures
underneath the actual temperature display for several
seconds. Several adjustments may be required. Each time you
adjust the controls, allow 24 hours for the refrigerator to reach
the temperature you have set.
Non-LCD Models:
To change the temperature, press and releasethe FREEZER
TEMP/FRIDGE TEMPpad. The SETlight will come on and
the display will show the set temperature. To change the
temperature, tap either the V or A pad until the desired
temperature is displayed.
Once the desiredtemperature has been set, the temperature
display will return to the actual refrigerator and freezer
temperatures after 5 seconds. Severaladjustments may be
required. Eachtime you adjust the controls, allow 24 hours
for the refrigerator to reach the temperature you have set.
Thetemperature controlscandisplayboththeSETtemperature
aswellas theactualtemperature in therefrigerator and freezer.
Theactualtemperature may vary slightlyfromtheSETtemperature
basedon usageand operatingenvironment.
Turning the cooling system off:
LCD models: Turning the coating system OFF stops cooling in both
the freezer and refrigerator compartments, but does not shut off
dectrical power to the refrigerator.
LCD Models:
Access By: Home > Options > Information and Settings >
Cooling System Off
To turn the cooling system back on, press the touch screen
and press the ON button.
Activate By: Pressing ENTER.
Non-LCD Models:
Pressand release the FREEZER TEMP/FRIDGE TEMPpad.
Press ^ to set freezer temperature to 5. The display will
show OFF.To turn the unit back on, press the FREEZER
TEMP/FRIDGE TEMPpad. PressV to set the freezer and
refrigerator temperatures to the preset points of 0°F(-18°C)
for the freezer and 37°F(3°C) for the refrigeratoE
When the unit is turned back on, it will take up to 24 hours
to stabilize.
Performance Air Flow System
The Performance Air-Flow System is designed
to maximize temperature control in the refrigerator and
freezer compartments. This unique special feature consists
of the Air Tower along the back wall of the refrigerator and
the Air Tunnel on the bottom portion of the freezer rear wall.
Placing food in front of the louvers on these components will
not affect performance. Although the Air Tower and the Air
Tunnel can be removed, doing so will affect temperature
performance. (Forremoval instructions, on-line, contact
us at ge.com or call 800.GE.CARES. In Canada,contact us
at geappliances.caor call 1,800.561.3344.)
-,,,,,,,
0
#iiii_iiiii#
i'_ii[ii_iiii#i
i_iii_ii,i,::,iiiii
t_
oo
2=
¢b
o
R