GE Profile 23 Manual Del Propietario E Instalación página 25

Installation Instructions
[]
DISCONNECT THE POWER COUPLING
(on some models)
If the refrigerator has a water dispenser,
there is a power line (harness) from the cabinet
into the bottom hinge on the freezer door that
must be disconnected.
To disconnect pull apart at the coupling.
Bottom _ _ L_J © _J//
freeze,- / _ -'--t----_:::::='_J ---------
hin
[]
DISCONNECT THE ELECTRICAL
CONNECTORS (on some models)
If the refrigerator has a refreshment center,
there are electrical connectors (harnesses)
from the cabinet into the bottom hinge
on the refrigerator door that must be
disconnected.
To disconnect, pull apart each connecton
Bottom
refrigerator
hinge
[] CLOSE THE FREEZER AND
REFRIGERATOR DOORS
[] REMOVE THE FREEZER DOOR
[] Remove the freezer door top hinge cover
(if equipped) bg either squeezing it and pulling
it up or bg prging it off with a plastic puttg
knife.
[] Remove the two 5/16" or 1/8" hex head
screws, then lift the hinge straight up to free
the hinge pin.
5/16" or 1/8" hex head
[] Open the freezer door to 90. °
90 °
25