Publicidad
Idiomas disponibles
Idiomas disponibles
■
Floor standing type
Vertical adjustment
Move the louver manually and point it horizontally to
send cool air across the entire room.
Horizontal adjustment
Sending air in different directions
Lift up the vertical louvers slightly and point them in
your preferred directions.
2
1
In this case, do not use the
auto swing function.
23-EN
How to change the louver angle
⑧
⑦
⑥
⑤
④
③
①
Louver
Louver
Vertical louver
The louvers can be adjusted at 8 phases linking with
5 louvers. When changing the louver angle, hold near
the center of louver and move it slowly.
■
Floor standing cabinet type
Move the louver manually and point it horizontally to
send cool air across the entire room.
– 12 –
Changing the air discharge
Follow the procedure below to change the
air discharge:
1
Remove the two fixing screws of the
air discharge. (The fixing screws are to be
reused)
2
Insert your hand into the air discharge
and pull it up slightly, then remove the
air discharge from the claw hook at the rear
side.
3
Lift up the air discharge and remove it.
4
Reverse the air discharge and reattach it to
the main unit.
Make sure that the four claw hooks
(2 at the rear and 2 at the lower sides)
are hooked into the mounting positions.
5
Be sure to tighten the air discharge with the
removed fixing screws so that it does not
come off.
EN
24-EN
Publicidad
