Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT NOTES ON FABRIC CLEANING AND CARE
Do not use a cloth for cleaning!
This screen surface material is particularly sensitive to contact with hands or
greasy moist objects. This is due to the surface structure, which is what makes
this high-contrast ultra-short distance screen work.
The fabric has a noticeable 3D surface structure, which allows the focused
reflection of the projection light exclusively from a steep angle from below
(UST projector position) to the viewer's sitting position (eye line).
•
The screen should be retracted into the housing after each use to ensure
a long service life.
•
Stains from insects or other (organic) substances may be difficult or
impossible to remove.
•
Do not use a cloth to clean the screen!
•
Do not rub the screen with your hands or fingers!
•
Use only the fine hair brush provided to clean the screen only horizontally
along the surface structure with light strokes to remove any fine dust or
particles.
•
If there are particles on the screen that do not interfere with the projection
image, ignore them. If particles are found to interfere with the projection
and cannot be removed by brushing gently and horizontally, use a tesa®
strip and remove the particles with it.
•
Prevent opening and closing the screen multiple times in a short period.
This will activate the heat protection of the motor and deactivates the
screen completely. Only after a rest period of 20-30 minutes will the screen
be able to be operated.
3
Publicidad
