OPERATION
This screen has 4 control options:
1.
Housing push-button, manual switching cycle.
2.
Trigger control
3.
Radio remote control
4.
Infrared remote control
CONTROL VIA THE HOUSING PUSH BUTTONS WITH MANUAL
SWITCHING CYCLE
The manual cycle button is located on the end cover of the power supply side
of the housing. Pressing the button will raise, stop, lower and stop. One button
press for each function in an endless loop.
Stop
Operating
Up
button
Stop
Down
Operation button
IR eye connection (3.5 mm)
12V trigger connection (2.5 mm)
Projector
Fig. 4
10