Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
PROGRAMMING THE WASH TIME
DELAY TIMER
Used to delay the start of the selected wash
program up to 19 hours. The Delay Timer cannot be
set after the selected program starts.
1. Press the Delay Timer button after selecting the
wash program and other auxiliary functions.
2. Display will show "1h", program number,
program duration and delay timer alternately
for 2 seconds.
3. Set the desired start time by pressing the Delay
Timer button. The time will increase by 1 hours
every time the Delay Timer button is pressed.
4. To start the selected wash program with delay,
press the Start/Pause button. The Delay light will
be illuminated during the time the delay timer is
active.
NOTE
If after setting the delay timer you opened and then
closed the door within 4 seconds, the appliance
resumes the delayed start. If the door is open for
more than 4 seconds, the delay timer is paused and
can be restarted by pressing the Start/Pause button.
CHANGING SETTINGS WHILE DELAY TIMER IS
ENABLED
After the Delay Timer function is activated, you
cannot change the washing program, auxiliary
functions or duration of the delay time.
CANCELLING DELAY TIMER FUNCTION
1. Press and hold Start/Pause button for 3 seconds.
2. After 3 seconds "1" appears on the display. At
the end of the cancellation process "0" appears
on the display.
You can select and start a new program following
the cancellation of the Delay Timer function.
STARTING THE PROGRAM
Select the program and auxiliary functions the
press the Start/Pause button. Once the program
starts, the estimated time remaining to the end of the
program will appear on the display.
STARTING THE PROGRAM
Select the program and auxiliary functions the
press the Start/Pause button. Once the program
starts, the estimated time remaining to the end of the
program will appear on the display.
The current wash cycle will be indicated by the
indicator lights above the Program button (Wash,
Dry, End, Ultra Hot End). The appliance will be
silent for approximately 40 - 50 minutes during the
drying stage.
NOTE
The total program time can change based on the
ambient temperature, temperature of the water
supply and amount of dishes.
NOTE
It is not recommended to open the door of the
appliance when it is running. Stop the appliance by
pressing the Start/Pause button then open the door.
If the door is opened without pressing the Start/
Pause button, the appliance will stop. If any button
is not pressed, the appliance will be paused
automatically 4 seconds after the door is opened. To
continue the program, close the door and press the
Start/Pause button.
If the door is closed within 4 seconds after the door
is opened, the program will continue automatically.
NOTE
Program and auxiliary functions cannot be set/
changed after the program has started. A new
program can be selected and started following the
paus or cancellation of the program.
CHILD LOCK
The Child Lock function can be activated by pressing
and holding the "Extra" and "Options" buttons
simultaneously for 3 seconds. When activated, all
lights flash on the appliance and "CL" is shown on
the display.
To deactivate the Child Lock function, repeat the
above instructions. All lights and "CL" will flash
twice and then remain off.
9
Publicidad
