Medion MD 14482 Guía Rápida página 137

 To ensure adequate ventilation, the clearances shown in the illustration above
must be maintained. The spacer at the back of the appliance must touch the
wall. It ensures that the correct clearance is maintained when positioning the
microwave.
 Do not remove the feet.
 Connect the microwave to a convenient and easily accessible, earthed mains
socket.
.. Heating up the empty appliance
Before using the microwave, the appliance must be heated up so that residues left
over from production can evaporate. To do this, switch on the appliance in grill
mode without food or accessories inside as described below:
 Open the door and remove any packaging or accessory parts from the cooking
compartment.
Close the door.
 Press the
 Press the
button and then the
of 10 minutes is set.
 Press the
button again to start the heating process.
During this initial heating period you may notice faint odours. These
smells are not dangerous and will disappear after a short time. Ensure
adequate ventilation, e.g. by opening a window.
 The appliance switches off automatically after 10 minutes. Wait until it has com-
pletely cooled down.
 Pull the mains plug out of the mains socket and then clean the appliance once
again using a damp cloth from inside and dry the microwave carefully.
138
30 cm
0 cm
20 cm
min. 85 cm
button until is shown on the display.
20 cm
button repeatedly until the cooking time