Operation
Timer
If your hob has this function, you can activate it in two different ways:
You can use it as a minute timer. In this case, the timer will not switch off any cooking zones when the set
time has elapsed.
You can program it to switch off one or more cooking zones after the set time has elapsed.
The timer has a maximum duration of 99 minutes.
Using the timer as a minute reminder (For models without Slide control)
(If you do not have any cooking zones selected)
Make sure that the hob is switched on. To be able to
use the timer, at least one zone must be active.
Touch the "+" key on the timer. The timer indicator
will start flashing and "30" will be shown on the dis-
play.
Set the time by pressing the "-" or "+" buttons on the
timer. Tap the "-" or "+" buttons on the timer once to
decrease or increase the time in 1-minute intervals
for the first 15 minutes (then 5 minutes). Press the "-"
or "+" buttons on the timer repeatedly to decrease or
increase the time. If the set time exceeds 99 minutes,
the timer will automatically return to 0 minutes.
By touching "-" and "+" at the same time, the timer is
canceled, and the "--" will be displayed in the minu-
te display.
When the time is set, the countdown starts. The dis-
play will show the remaining time and the timer will
flash for 5 seconds.
At the end of the set time, the timer indicator will
beep for 30 seconds. The timer indicator will display
"- -" when the set time has expired.
41
English
infiniton.es