Safety Instructions; Interim Storage; Checking The Delivery Contents; Disposing Of The Packaging Material - Steelcase Ology Instrucciones De Uso

_______________________________________________________________

4.1 Safety instructions

Risk of injury and damage!
The fastening screws could tear if the desk
is lifted by the desktop or the attached
components.
Always take hold of the desk at the

underframe to transport or move it.

4.2 Interim storage

If you want to store the desk temporarily before
installation, the following conditions must be met:
■ Undamaged transport packaging
■ Sufficient carrying capacity of the floor
■ Dry floor
■ Level floor surface
■ Temperature range: +10 °C to +40 °C
■ Max. rel. humidity: 80 %
4.3 Checking the delivery
contents
After unpacking, check the product immediately for
damage sustained during transportation and for
completeness; inform the manufacturer of any
damage as soon as possible.
4.4 Disposing of the packaging
material
The packaging includes the following:
■ Outer packaging made of cardboard
■ Shrink film made of polyethylene (PE)
■ Bubble wrap made of polyethylene (PE)
■ Edge protectors made of cardboard or
polyethylene (PE)
■ Corner protectors made of polyethylene (PE)
These materials are recyclable. If assembled by
Steelcase or an assembly company authorised by
Steelcase, the manufacturer will dispose of the
packaging. If you assemble the desk yourself, please
ensure that the packaging material is correctly sorted
by type and recycled.
10
Transport and storage

4.5 Assembly

For assembly of the Ology desk and Ology Bench,
please follow the attached assembly instructions.
Steelcase recommends assembly by a
specialist dealer or an assembly company.

Attaching accessories

For attaching accessories, please follow the attached
assembly instructions.

4.5.1 Disassembling the desk

The desk can be dismantled into its pre-assembled
components. Dismantling should only be realised by
skilled and qualified personnel. Follow the separate
disassembly instructions.
After disassembling the desk, for example for
transport reasons:
ATTENTION
Risk of damage to the desktop!
Reassemble the two side frames only with
the appropriate desktop cross-member of
the same desk.
ATTENTION
Risk of damage to lift mechanism!
Values stored in the controller
do not match the settings of
another desk.
4.5.2

Re-assembly

For the assembly, follow the separate assembly
instructions.

4.6 Electrical connection

Check the electrical equipment of the
desk. Rectify defects such as loose
connections and damaged cables
immediately.
Attach or detach connectors only when
the equipment is de-energised.
120917