Maintenance; Technical Assistance; Removal From Service, Disposal And Recycling - S&P EMIBLUE-A Serie Instrucciones De Uso

Emisor con fluido
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

will automatically disconnect the appliance
and it will stop heating. To reset it, follow these instructions:
- Stop the appliance by pressing the StandBy key (Status LED_red).
- Disconnect the equipment from the mains
- Let the appliance cool for about 30 minutes.
- Make sure that there is no obstruction to free air flow.
- Press the StandBy key again (status LED green or amber).
- If, after these actions, the appliance does not work normally, please
contact the wide S&P Official Technical service network.

7. MAINTENANCE

The S&P radiators do not need specific maintenance, however we suggest:
1- Keep the air passages clean.
2- Dust the radiator periodically with a soft dry cloth.
3- When it is very dirty, clean with a cloth with an un-abrasive detergent.
4- Always clean when cold and avoid using solvents.

8. TECHNICAL ASSISTANCE

The extensive Official Services S&P Network guarantees correct technical
assistance. If you see an anomaly in the appliance, please get in touch with
any of the official services mentioned above, where you will be duly dealt with.
Any work done by those not pertaining to the S&P Official Services will
oblige us to annul the guarantee.
For any questions regarding S&P products, contact one of our After
Salesoffices (Spain only) or your dealer (rest of world). To find your nearest
S&P dealer, visit our website at www.solerpalau.com

9. REMOVAL FROM SERVICE, DISPOSAL AND RECYCLING

- When not using the appliance for extended periods of time, it
should be returned to its original packaging and stored in a dry,
dust-free place.
- EU regulations and our commitment to future generations obli-
ge us to recycle used materials; please remember to dispose of
all superfluous packaging materials at the appropriate recycling points,
and to drop off obsolete equipment at the nearest waste management
point.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGE
TO PERSONS AND/OR PROPERTY RESULTING FROM THE FAILURE TO
COMPLY WITH THESE INSTRUCTIONS.
S&P RESERVES THE RIGHT TO MODIFY THE PRODUCT WITHOUT
PRIOR NOTICE.
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Emiblue-4aEmiblue-6aEmiblue-8aEmiblue-10aEmiblue-12a

Tabla de contenido