Installation - Sony MEX-M71BT Manual De Instrucciones

other parts from interfering with your
driving operations.
• If any shock-absorbing equipment is in
your boat, contact the store where you
purchased this unit, or the boat dealer,
before installation.
Note
Before attaching the double-sided tape , clean
the surface of the dashboard with a dry cloth.

Installation

Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar  and the bracket  from
the unit.
1
Pinch both edges of the protection
collar , then pull it out.

2 Insert both release keys  until they
click, and pull down the bracket ,
then pull up the unit to separate.


Face the hook inwards.
42
GB
Mounting the unit in the
dashboard or the cutout hole on
boat
• Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
• For Japanese cars, see "Mounting the unit
in a Japanese car" (page 43).
1
Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2
Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
in).
182 mm (7 1 /
4
1 / in)
8
Catch
Inner console panel




in)