JUKI TL-2200QVP Mini Manual De Instrucciones página 29

(Example: In the case of guiding the material so that it is kept 1 cm away from the needle position)
In the case of setting the guide on the
right side of needle
1 Aligning the leftmost scale mark on guide
bar A with the left edge of guide base B ,
tighten setscrew 3 .
2 Aligning guide C with the first scale mark
from the right edge of guide base B ,
tighten setscrew 4 . The distance from
the needle position to the guide is 1 cm.
3
4
B
C
1 cm
Remove setscrew 1 . The stitch ruler can be used on both
the right and left sides by changing the mounting position of
guide section 2 from right to left or left to right.
The interval of
scale marks on the
A
guide bar is 5 mm.
In the case of setting the guide on the
left side of needle
1 Aligning the rightmost scale mark on guide
bar A with the right edge of guide base B ,
tighten setscrew 3 .
2 Aligning guide C with the second scale
mark from the left edge of guide base B ,
tighten setscrew 4 .
The distance from the needle position to the
guide is 1 cm.
1
2
3
Adjusting the guide position.
Adjust the guide position referring to the needle
position and positional relation between the bar
scale and guide. Securely tighten the setscrew.
4
Carry our sewing using the guide as
reference.
Stitches can be sewn while keeping the regular
stitch intervals.
3
4
A
C
1 cm
B
27