To Turn Off The Thread Trimming Foot Switch; Reverse Feed Stitch; When Making A Knot On The Reverse Side Of The Material - JUKI TL-2200QVP Mini Manual De Instrucciones

Test sewing

■ To turn OFF the thread trimming foot switch

Fit the foot switch stopper
in position.
Foot switch stopper
Approx. 1 cm
Approx. 1 cm
Material
(reverse side)
Reverse side
Securely fit the foot switch stopper by pressing four claws.
■ Reverse feed stitch (lock stitch)
Push down the reverse feed stitch lever to sew reverse
stitches over the forward stitches for about 1 cm.
■ When making a knot on the reverse side
of the material
1
2
Top side
When the sewing is finished, raise the needle and
the presser foot. Then draw both the needle and
the bobbin threads away from you by approximate-
ly 10 cm together with material, after lowering the
presser foot. (The needle and the bobbin threads
are simultaneously trimmed.)
Draw the needle thread onto the reverse side of
the material. Fasten the needle thread and the
bobbin thread together. Then trim the both threads
near the knot.
19