10 Environment - Festool TS 75 EBQ Manual De Instrucciones

English
nised specialist workshop, unless otherwise
indicated in the operating manual.
► When working with plaster- and cement-
bonded fibreboards, clean the tool particu­
larly thoroughly. Clean the vents of the
power tool and on/off switch using dry, oil-
free compressed air. Otherwise, gypsum
dust deposits may build up inside the power
tool's housing and on the on/off switch and
harden when exposed to humidity. This may
impair the switching mechanism.

10 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with European Directive
on waste electrical and electronic equipment
and implementation in national law, used power
tools must be collected separately and handed
in for environmentally friendly recycling.
Information on REACH: www.festool.com/reach
22