Settings; Working With The Machine; Transportation; Accessories - Festool UG-KAPEX KS60 Manual De Instrucciones

Attach an additional saw blade if re­
quired [19].
6.2 Trimming attachment KA-UG-KS60
Illustrations for the left trimming attach­
ment - the right trimming attachment is
fitted in the same way.
► Fold down the support foot [10].
► Place the trimming attachment in the
groove, secure the lugs [11].
7

Settings

Adjust the following settings before using for
the first time:
► Adjust the attachment horizontally [12].
► Undo the rotary knob on the trimming at­
tachment [13].
► Align to the correct position [14].
► Tighten the rotary knob on the trimming at­
tachment [13].
► Undo the hexagon screws [14].
► Adjust the scale [15].
► Secure the lugs and hexagon screws [16].
8

Working with the machine

Observe the following instructions:
– Do not overload the base frame. Observe
the maximum load capacity.
– Make sure that the all bayonet fittings are
closed before starting work.
– Always clamp the workpiece securely, es­
pecially long, heavy sections. After the ma­
chine has cut all the way through the work­
piece, the centre of gravity may shift sud­
denly and cause the base frame to tip over.
► If the workpiece is protruding, pull out the
extension rail [17].
When storing for a relatively long period:
Set down the UG-KAPEX KS 60 with
KS 60 E or KSC 60 EB as shown in fig­
ure [21].
9

Transportation

► Move the compound mitre saw into the
transport position [18] (see the operating
instructions for your compound mitre saw
for a description).
► Weigh down the tubular frame by placing
your foot on it and use one hand on the side
of the folding/fixed stand to lift the adapter
plate [18].
The folding/fixed stand disengages from the
catch.
► Fold in the folding/fixed stand.
The folding/fixed stand engages by means
of a locking latch.
► Slowly swivel the adapter plate into the ver­
tical position.
The compound mitre saw is ready for transpor­
tation [19].
9.1 Packing up the trimming attachments
If you bought both of the trimming attachments
in a set, you can fix these onto the under­
frame [21] with the transport caps and
strap [20].
► Fold the support feet of the two trimming
attachments together.
► Placing the trimming attachments on top
of each other
► Attach the transport caps.
► Close the strap.
The underframe can be transported verti­
cally [21] or horizontally [22].

10 Accessories

The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet at "www.festool.com".

11 Environment

Do not dispose of the device as domestic
waste! Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the respective nation­
al regulations.
Information on REACh: www.festool.com/reach
Customer service and repair only through
manufacturer or service workshops: Please
find the nearest address at: www.festool.com/
service
EKAT
4
5
3
2
1
Only use original Festool spare parts! Order No.
at: www.festool.com/service
English
11