Service Spark Plug; Check Valve Clearance; Engine Air Cooling System; Charge Battery - Briggs & Stratton 040248 Manual Del Operario

Ocultar thumbs Ver también para 040248:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

C
os
IMPORTANT:
DO NOT use pressurized air or solvents
to clean cartridge.
Pressurized air can damage cartridge;
solvents will dissolve cartridge.
7.
Place air cleaner pre-cleaner
and cartridge into
housing. Cartridge
must fit securely in housing.
8.
Align tabs on cover with slots in housing and replace
cover,
9.
Hook handle and close cover.
I
WARNING
DO NOT
attempt
to start your
engine with
filters
or air cleaner
cover
removed.
IO. Replace roof.
Service
Spark
Plug
WARNING
When
adjusting
or making
repairs to your
generator:
Disconnect
the spark plug wire from
the spark
plug and place the
wire where
it cannot contact
spark plug.
When
testing
for engine
spark:
Use approved
spark plug tester.
DO NOT
check for spark with
spark plug removed.
Change the spark plug every IO0 hours of operation
or
once each year, whichever
comes first. This wi[[ help your
engine to start easier and run better.
[.
Clean area around spar[< plug.
2.
Remove and inspect spar[< plug.
3.
Check electrode
gap with wire feeler gauge and reset
spark plug gap to recommended
gap if necessary (see
Figure [8 and "Specifications").
I
4.
Replace spark plug if electrodes are pitted, burned or
porcelain
is cracked. Use the recommended
replacement
spark plug. See Specifications.
5.
Install spark plug and tighten firmly.
Check
Valve
Clearance
Regular valve clearance check and adjustment
will improve
performance
and extend engine life. This procedure
cannot be done without
partial engine disassembly and the
use of special tools. For this reason we recommend
that
you have an authorized
service dealer check and adjust
valve clearance at recommended
intervals.
Engine
Air
Cooling
System
Over time debris may accumulate in cylinder cooling fins
and cannot be observed without
partial engine
disassembly. For this reason, we recommend
you have an
authorized
Briggs & Stratton service dealer clean the
cooling system per recommended
intervals (see
"Maintenance
Schedule"). Equally important
is to keep top
of engine and rotating screen free from debris. See "Clean
Debris".
Replace
Fuel
Hoses
and
Regulator
it is strongly recommend
that you replace the fuel hoses
and fuel regulator
after five years of use. Even though
these components
are designed for outdoor
use, constant
exposure to the elements and to sunlight causes
deterioration.
Charge
Battery
DANGER
DO NOT
dispose
of battery
in a fire.
DO NOT
allow any open flame, spark, heat, or lit cigarette
during
and for several minutes
after charging a battery.
DO NOT
open or mutilate
the battery.
Wear
protective
goggles, rubber
apron, and rubber
gloves.
Remove
watches,
rings, or other
metal objects.
Use tools with
insulated
handles.
Figure I I -- Check Spark Plug Electrode Gap
IMPORTANT:
The generator
should be started at least
once every seven days and allowed to run at [east
30 minutes. If this cannot be done, the battery wiI[ lose it's
charge over time.
20
www.briggsan dstratton.com

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido