Other Functions; Using The Aux Source; Switching The Display Illumination - Pioneer DEH-P65BT Manual De Instrucciones

Section
02 Operating this unit

Other Functions

Using the AUX source

This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to AUX1 or AUX2. The
relationship between AUX1 and AUX2
sources is explained below.
About AUX1 and AUX2
You have two methods to connect auxiliary
equipments to this unit.
AUX1 source:
When connecting auxiliary equipment using a
stereo mini plug cable
% Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
The allocation of this auxiliary equipment is
automatically set to AUX1.
AUX2 source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
The allocation of this auxiliary equipment is
automatically set to AUX2.
# You can only make this type of connection if
the auxiliary equipment has RCA outputs.
46
En
Selecting AUX as the source
% Press SOURCE to select AUX as the
source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 43.
Setting the AUX title
The title displayed for each AUX1 or AUX2
source can be changed.
1 After you have selected AUX as the
source, use MULTI-CONTROL and select
FUNCTION to display TITLE INPUT.
2 Enter a title in the same way as the
built-in CD player.
For details concerning operation, refer to En-
tering disc titles on page 19.
# The AUX title can be up to 8 characters long.

Switching the display illumination

You can change the color of the display illumi-
nation.
% Press ILLUMINATION.
Each time you press ILLUMINATION the color
changes:
RAINBOW (rainbow)—WHITE (white)—
SKYBLUE (sky blue)—OCEANBLUE (ocean
blue)—DEEPBLUE (deep blue)—PINK (pink)—
RED (red)—AMBER (amber)—ORANGE (or-
ange)—GREEN (green)—PUREGREEN (pure
green)—CUSTOM (custom)
Notes
! RAINBOW setting cycles continuously
through all the colors.
! CUSTOM is an adjusted color that you create
(refer to Adjusting the illumination color on
page 44).
! If you do not operate the function within about
eight seconds, the display is automatically re-
turned.